Photos of buyers
Specifications
- Brand Name: UNI-T
- Certification: CE
- DIY Supplies: Electrical
- Origin: CN(Origin)
- Measuring Capacitance Range: 60.00nF~60.00mF
- Model Number: UT219E/UT219M/UT219DS
- Dimensions: 235*83*47mm
- Measuring Voltage Range: AC 6.000V~600.0V
- Measuring Resistance Range: 600.0ohm~60.00Mohm
- Weight: 338g
- Measuring Current Range: AC 60.00A~600.0A
- Display Type: Analog and Digital
- Jaw size: 33mm
- Protection rating: IP54
- LoZ ACV: 600V
- Display count: 6000
- Auto/Manual range: YES
- Auto power off: YES
- Data hold(H): YES
- Auto backlight: YES
- AC current frequency response: 40Hz~400Hz
- AC voltage frequency response: 40Hz~400Hz
- Relative mode (REL): YES
- MAX/MIN: YES
- Function selection (SELECT): YES
- 2m drop test: YES
- Power supply: AAA 1.5V alkaline battery*3
- LCD size: 35mm*31mm
UNI-T UT219E/UT219M/UT219DS True RMS Professional Clamp Meters; IP54 dust/waterproof ammeter, LoZ ACV test
Price history
- for 3 month
- for half a year
- Requires Alitools extension
Price drop notification
This item is from other sellers
Similar Products
Customer Reviews
meter works great , can measure current and voltage simultaneously . few minor issues i found : the light cant be turned on manually , only with the light sensor . imho the best thing to do is to block the light sensor with a piece of duct tape , so the light is constantly on . if not needed there's actually a "light off" button , but no "light on" lol .once you press the off button , you cant turn the light back on , you need to shut down the meter , this is dumb . another issue is with the uA current measurement through the leads . i found no fuse inside , i'm not sure if this circuit is protected . characters on the display are pretty small (like AC , DC , A , V etc)
meter works great , can measure current and voltage simultaneously . few minor issues i found : the light cant be turned on manually , only with the light sensor . imho the best thing to do is to block the light sensor with a piece of duct tape , so the light is constantly on . if not needed there's actually a "light off" button , but no "light on" lol .once you press the off button , you cant turn the light back on , you need to shut down the meter , this is dumb . another issue is with the uA current measurement through the leads . i found no fuse inside , i'm not sure if this circuit is protected . characters on the display are pretty small (like AC , DC , A , V etc)