HoldPeak Digital Multimeter Tester HP-770D Auto Range Multimetro True RMS 40000 Counts Measure Ohm Volt Amp Capacitor Tester ► Photo 1/6
HoldPeak Digital Multimeter Tester HP-770D Auto Range Multimetro True RMS 40000 Counts Measure Ohm Volt Amp Capacitor Tester ► Photo 1/6
HoldPeak Digital Multimeter Tester HP-770D Auto Range Multimetro True RMS 40000 Counts Measure Ohm Volt Amp Capacitor Tester ► Photo 2/6
HoldPeak Digital Multimeter Tester HP-770D Auto Range Multimetro True RMS 40000 Counts Measure Ohm Volt Amp Capacitor Tester ► Photo 3/6

Photos of buyers

94 more
photos

Specifications

  • Brand Name: HoldPeak
  • DIY Supplies: Electrical
  • Certification: None
  • Origin: CN(Origin)
  • Model Number: HP-770D
  • AC Current: 400uA/4000uA/40mA/400mA/4A/20A
  • AC Voltage: 400mV/4V/40V/400V/750V
  • Measuring Resistance Range: 400/4K/40K/400K/4M/40M
  • Operating Mode: Auto Range
  • Measuring Inductance Range: NO
  • Display Type: Digital Display
  • DC Current: 400uA/4000uA/40mA/400mA/4A/20A
  • DC Voltage: 400mV/4V/40V/400V/1000V
  • Measuring Capacitance Range: 9.999nF----99.99mF
  • Dimensions: 195*88*40mm
  • Operating Temperature: -20 - 10000 ℃
  • Frequency: 9.999Hz~9.999MHz
  • Display: 40000
  • Bar Graph Display: Yes
  • Back Light: Yes
  • Diode Test: Yes
  • True RMS: Yes
  • Relative Value: Yes
  • Max/Min: Yes
  • NCV: Yes
  • Data Hold: Yes

HoldPeak Digital Multimeter Tester HP-770D Auto Range Multimetro True RMS 40000 Counts Measure Ohm Volt Amp Capacitor Tester

Seller:
Alitools rating:
78%
/
Aliexpress rating:
96%
3 634.31 $
32   reviews
Rating: 4.8

Price history

Price drop notification

Out telegram bot will notify you once the price drops to the desirable one

Customer Reviews

M***M
December 11, 2020

Very accurate meter. Overall quality is acceptable for bench use. 9v battery may not last long with the backlight turning on constantly. The meter does power off after a few minutes. Voltage measurement is spot on. Amps tend to climb under constant 11Amp load... shunt may have a slight positive temperature coefficient. so I would stay under 10A definitely not 20.

D***r
November 27, 2020

Electrically everything is fine with the Meter and this time I also got one with a “good” case. This one (right hand side fotos) has a real silicone sleeve and the case doesn’t squeak a bit. On the left hand side you can see my first one, now glued shut. However the most important part is to add some tape in the battery/fuse compartment.

Anonymous