Very fast shipping. Came with cheap manuel. Nice case. No feet, but I can add stick on feet.
Order arrived in US in 16 days by FedEx. Power supply tested ok. Max voltage I measured is 61.5 volts (this model rated to 60 Volts). Current into 1 Ohm load 32.5 Amps (this model rated 33 Amp). Knobs to adjust voltage and current are 10 turn and adjust smoothly. A couple quirks: The built in voltmeter does not seem to read anything below 0.6 Volts. The supply can put out voltages lower than 0.6 V (0.4 V for example) but the meter just displays 0.0. Above 0.6V the built in meter works fine. Also the built in meter lags when changing the voltage. For example if I adjust voltage to 25V the display will read 23.2, 23.7, 24.1, 24.6, 24.8, then finally 25.0 about 4 seconds after the voltage actually reached 25V. And when switching the supply off the output does not immediately turn off. Capacitors in the unit deliver power for several seconds after the switch is off. I'm going to make a small box with a DC switch for the output.