Photos of buyers
Specifications
- Brand Name: JGZUI
- Origin: CN(Origin)
- Type: Face Mill
- Diameter: 40
- Material: Tungsten Cobalt Alloy
1/2" Shank 12mm shank andrail Router Bit Set - Standard/Flute Line knife Woodworking cutter Tenon Cutter for Woodworking Tools
Price history
- for 3 month
- for half a year
- Requires Alitools extension
Price drop notification
This item is from other sellers
Similar Products
Customer Reviews
Very good quality of product. Altough the paint had worn off very quickly, blades stayed sharp. My only objection goes towards blade tip of narrower bit - one of them was wider than opposite one by about 0,2mm - this caused oak to overburn at the top of the milled railing and I had to reduce RPMs from 12kmp to 9kpm. I used Makita RP2300 router reversed on Kreg routing pad. This is how bits look like after 50 meters of oak and 20 meters of ash, both milled 2 times per groove plus one finishing pass, so 3 passes per groove x 4 grooves x 70 meters of railings = 840 meters of cutting / 2 bits used = over 400 meters of grooves routed. Clean cut. Good piece of tool.
Very good quality of product. Altough the paint had worn off very quickly, blades stayed sharp. My only objection goes towards blade tip of narrower bit - one of them was wider than opposite one by about 0,2mm - this caused oak to overburn at the top of the milled railing and I had to reduce RPMs from 12kmp to 9kpm. I used Makita RP2300 router reversed on Kreg routing pad. This is how bits look like after 50 meters of oak and 20 meters of ash, both milled 2 times per groove plus one finishing pass, so 3 passes per groove x 4 grooves x 70 meters of railings = 840 meters of cutting / 2 bits used = over 400 meters of grooves routed. Clean cut. Good piece of tool.